The first page of the document has its own unique design that each student must adhere to. After all, the title of the abstract is the face of all the work done and it creates the first impression (negative or positive) of the inspector. If the first page is framed incorrectly, then the reviewer, without even reading the text, will send the document for revision.
The title page of the abstract is drawn up according to two main state standards:
- GOST 7.32-2001 - “Research report”. This applies to research work, which is the abstract. In this section of the section, all the necessary requirements are well described and students must adhere to them when they make out the main page of the work. That is, what exactly should be on the title.
- GOST 2.105-95 - as a rule, they say ESKD, but the document is called in full: "Unified system for design documentation." This state standard is valid not only in Russia, but also in Belarus, Kazakhstan, Ukraine. Here are indicated General requirements to any text documents. That is, the student will read what the format should be title page how to write the name of the university, student and teacher details, etc.
Teachers of some universities are not guided by GOSTs, but create guidelines based on GOSTs, which spell out the requirements for the entire abstract, including the first page of the abstract.
Still, according to GOSTs, it is easier to draw up documents, since even if students did something wrong according to the training manual, the teacher will not be able to object, since the student adhered to state standards.
Title page rules
Despite the fact that university teachers create manuals with their own requirements, there are certain rules that must be followed in any case. Before creating the title page of the abstract, you need to set the margins: right - at least 1.5 cm, left - 3 cm, and top and bottom 2 cm, respectively.
However, it is better to learn these nuances at the department, as the teacher can change the requirements and deviate from state standards.
Title page home page The document for each student must contain the following information:
- Country name (not always);
- full or abbreviated name of the department. This should be discussed with the reviewer;
- name of the discipline;
- subject matter scientific work;
- student data (the author who wrote the work). All data must be indicated in full, that is, full name, course or group number;
- author's form of education. A student can study full-time, part-time or evening;
- reviewer's data, that is, position (mandatory) and full surname, name, patronymic;
- the city where the student is studying;
- year of issue of the document.
It should also be remembered that the abstract should be numbered from the first page, but the page number is not affixed on the title page.
It is worth noting that not a single GOST regulates the font, that is, the type and size are not indicated. As a rule, teachers themselves say what font to use, usually Times New Roman, size 14. Therefore, before starting to write a work, you need to consult your reviewer about this, who will accept the work.
The procedure for preparing the title page of the abstract
Do not know how to arrange the title page of the abstract? If the teacher did not indicate his requirements, then the student can independently draw up a document in accordance with GOST.
To begin with, you can conditionally divide an A4 sheet into 4 parts. This is the top, center, right and bottom, and in each of them adhere to certain requirements.
In the first upper part in capital letters in the center is written: MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION. On the next line, the name of the university is written and below the name of the department in quotation marks. We present an example for clarity:
The second part is located in the center of the A4 sheet. Here the word is written only in capital letters: "SUMMARY", and after it the subject and topic of the scientific work are indicated. For example:
The third block must be right-aligned, where the data of the students (group, full name) and the inspector (position and full name) are written. The position of the teacher must be indicated:
And the last, fourth block, although small, is no less important. It is drawn at the very bottom of the page and must be centered. It indicates the city in which the university is located and the year the scientific work was published. It is worth remembering: if the abstract is submitted at the end of December, then you need to indicate the next year. The example shows that only the name of the city and the year are written. It is very important to note that the dot is not placed anywhere.
Of course, title pages often differ from each other. It all depends on the particular university and its requirements. Some teachers ask that the design of the title page of the abstract comply with all GOST standards, while others want to see a work written exclusively according to the manual.
The title page of the abstract is issued quickly and easily if the student knows all the necessary rules. Here the requirements are minimal, but it is very important to correctly indicate the data not only of the university or department, but also of the teacher.
The article examined how to correctly issue the title page of the abstract in accordance with all GOST standards. When writing a paper, it is very important to consider the design of the first page. However, do not forget that universities often deviate at least a little from GOST, so it’s better to consult with your reviewer, and then start writing an essay.
How to arrange the title page of the abstract correctly? updated: February 15, 2019 by: Scientific Articles.Ru
Good day, dear reader! Many students, especially first-year students, have many questions related to the design of their academic papers. Sometimes it happens that the teacher gives his students the task to write, say, an essay on a certain topic. At the same time, he, as a rule, talks about how to draw up this work.
However, it often happens that the teacher's explanations regarding the design of the work are either unclear or incomplete. Therefore, often freshmen can be heard, for example, such a question: “ How to format the title page of the abstract?» We decided that it would be useful for students to know how to properly format the title page of the abstract, which is why this article was written.
Rules for the design of the title page of the abstract by example
What is abstract title page? This is a regular A4 sheet. For a better understanding of its structure, let's conditionally divide it into 4 blocks:
1) top (which contains the name of your educational institution);
2) central (which contains the name of the type of work and its name);
3) right (which contains the required details: full name of the author of the work (student or group of students) and supervisor, course, grade for the work and places for the signatures of the student and teacher);
4) lower (which contains the name of the city where you are studying and the year the work was written)
For clarity, here are 4 pictures, where all these elements are shown in an example:
As for the alignment and bolding of individual sections of text title page of the abstract, then this formatting is regulated by the corresponding GOST. However, everything is not so simple here.
In addition to GOSTs, which are developed by the state, the university has the right to modify some points, in particular those related to the design of the title pages of students' works. However, the whole humor lies in the fact that in each faculty and even in each department other relevant provisions or other regulations, which may also affect the appearance of the title page of the abstract, term paper etc.
Therefore, it is difficult to say something definite in terms of the design of the title page. Moreover, our state does not stand still and is constantly updating its regulatory documents, incl. and GOSTs.
Therefore, our advice to you - always take a sample of the title page at your department - and you will be happy! And best of all - directly from the teacher who gives you the task to write an essay. So it will be even more correct and reliable, because. some teachers often neglect modern standards and work "according to the old proven scheme."
If you have a disagreement with the teacher about the standards for the design of the title page or other parts of the abstract, then it is better not to argue, but to accept all the requirements of your teacher. Why do you need extra problems and difficulties? It is better to spend your time on writing a paper, and not on a showdown.
However, let us return directly to the title page of the abstract. Yet, although the standards are constantly changing, and there is no end to these changes, however, we decided to give the basic requirements that apply almost everywhere. Once again, always clarify the requirements for essay title page design in your department or with a teacher!
Rules for the design of the title page of the abstract
1. Upper block. As of 01/29/2012 (date of writing this article) in all universities of the country, you should write the top of any student scientific work (abstract, term paper, course project etc.) like this:
As you can see from the picture, all text must be typed in Times New Roman 14 point size (size), and the text must also be made bold (Ctrl + B), centered (Ctrl + E), line spacing is 1. As for the size and font type, then these rules apply further to the entire title page of the abstract.
In addition, almost all text must be written in CAPITAL LETTERS, with the exception of the phrase “Ministry of Education and Science Russian Federation» and the city where you study. In theory, the phrase "Ministry ..." should also be written in capital letters, but the fields of the title page of the abstract do not allow this.
Speaking of fields. They should be as follows: top and bottom - 2 cm each, left - 3 cm, right - 1.5 cm. These requirements, of course, apply further to the entire work. However, this is just an example. In your university, the department probably adopted different requirements for the size of the fields. From experience, margins are the most frequently changed standard in all universities.
2. Central block. It consists of several elements. Let's analyze them in more detail.
But first, it should be said about the positioning of this block on the title page. It is positioned as follows: from the bottom edge of the top block (where the city is written), you retreat down to the distance of two presses of the Enter key. This is the optimal spacing appearance title page.
Then you write the name of your faculty and department. In our case, only the name of the department is written, which is also allowed, but it is best to write the names in full, as expected. By the way, the name of the faculty is often written at the very top of the title page. Again, please check with your instructors.
After you write the name of the department, step back two presses of the Enter key. Write the phrase in capital letters: SUMMARY. This word is the most important in the title page, therefore it is allowed to write it in 16 point size for greater emphasis from the total mass of the text.
Then, back down one press of Enter, write the passphrase: By discipline: (name of discipline). Step back down one press of Enter down and write another keyword: Subject: (name of the topic of your essay). We are done with this block, let's move on to the next one.
3. Right block.
Step back from the central block a distance equal to pressing the Enter key twice and write the text as shown in the figure. At the same time, there are again discrepancies among the standards: somewhere this block is aligned to the right, somewhere to the left.
Just understand correctly: left alignment is alignment within the red frame in the figure, and not within the size of the entire title page of the abstract. And then some students, having heard the phrase “left alignment”, do this very alignment on the left side of the page. However, this should not be done - this is a mistake! Plus, it looks kinda ugly.
Some people have a question: how can you make lined graphs for an estimate, date, etc.? The easiest way is to indent a few spaces, and then select your indents and apply an underscore (Ctrl+U) to them.
4. Lower block.
From the right block, 7-8 indents should be made with the Enter key. Then apply center alignment (Ctrl + E) and write: on top - the name of the city where you study, on the bottom - the year the essay was written.
Download the title page of the abstract
However, everything that was described above was done only so that at least once in your life you would go over in detail with your eyes the main points of designing the title page of the abstract. AT real life no one ever remembers these rules. All students simply take a word file with a sample title page and insert it into their work, adjusting it according to the topic of their assignment.
Therefore, we have specially prepared for you a sample abstract title page in .doс format in order to simplify your life.
Conclusion: In this article, we analyzed in detail the structure of the title page of the abstract. We conditionally divided the entire title page into 4 parts (blocks): upper, central, right and lower. We have described each of the blocks as much as it is necessary for the student. At the end of the article, we gave you a link to download a sample abstract title page in .doc format
Now you know, how to write a title page for an essay.
During the course of study, every student of a college or technical school faces the completion of an essay. This work is a detailed presentation of material from scientific sources on a given topic. It is noteworthy that the more of these sources will be used in the course of the study, the better the report will be.
But the quality of such a document is assessed not only by the completeness of the material presented and the compliance with the topic set by the teacher, but also by other parameters - the uniqueness of the text, the achievement of the goals and objectives, the correct design, taking into account all the requirements, as well as other parameters.
This article will focus on writing one of the sections of the report - the title page - in accordance with all accepted requirements (or according to GOST).
If you have any difficulties with writing the abstract itself, contact the portal specialists who provide services for writing essays and term papers.
Correctly formatted title
The title page is the first page of any work, because it is the verifier who sees it first. That is why it is so important to write this part of the paper correctly.
This section of the work should:
- be written without errors;
- include all necessary information;
- be performed in accordance with GOST.
So, the title is part of the abstract document, so it must be written without spelling errors. But what should be included in it?
Any first page of the research should contain data on:
- educational institution where the author is studying;
- the department where the report is being made;
- type of work and its topic;
- the author and the verifier, as well as the reviewer;
- city and year of execution.
General requirements for registration
This section must be done in black Times New Roman text. Mostly 14 font size is used, but in some cases, which will be discussed later - 18. This page is not numbered, but is taken into account in the general numbering.
Let's consider each of the elements of the title in more detail.
- Information about the educational institution
In this case, you must specify the full name of the college or technical school - the data is located at the top of the page. When executing this paragraph, the standard font size is used and it is allowed to write it capital letters(but not required). The name of the SSUZ should be center aligned.
- Department where scientific work is written
Information is located under the name of the college or technical school, written in a standard font and separated from the name educational organization trait. Data about the department are aligned "in the center".
- Type of work and its theme
This item is located in the middle of the sheet. It is also centered, but the font size in this case should be 18. The type of report and its topic are written in bold.
- Information about the author, reviewer and reviewer
Please note that there may not be a reviewer - this is not necessary for papers written in secondary schools.
In this paragraph, you must specify the name of the student, his group and course, as well as the name and position of the inspector. If there is a reviewer, indicate his full name and position. The text of this paragraph should be aligned "from the right edge".
- year and city
Here you need to specify the year of execution scientific research and the city in which the SSUZ is located. The data must be centered.
Indentation
Indents are also an important point in the design of the title in accordance with GOST. The indent on the right should be 1.5 centimeters, and the rest should be 2.
Abstract title page - where to find a good example?
In order to complete the first page of the report correctly, many students struggle to find a good ready-made form. You can download a sample of the correct execution of the title on the Internet, but be sure to check it for compliance with GOST before filling it out. It is not recommended to take the titles of classmates as examples - thus, you can copy the error without even noticing it.
Among other things, it can be downloaded on our portal in a free format (see the first section).
This article discussed in detail the title page for a college essay and all the issues related to its writing and design: what needs to be indicated in the title, how to format it correctly, and where to find a quality sample that will help speed up the process of its implementation. After reading this article, you will be able to write a really good title for your work.
The title page is the face of the student work, which creates the first impression of it. Whether it is good or bad is up to you. For our part, we will tell you in detail and be sure to show how to write the title page of the abstract so as not to lose face.
What is the importance of the correct design of the title page of the abstract? If the title page is designed incorrectly, then the reviewer, most likely without even reading the text of the main part, will deploy you for revision.
Of course, all the norms and design standards are spelled out in GOST and in the manual at the department. However, before you start writing the title page of the abstract, ask the teacher if he has any personal preferences in the design. Suddenly you got a not very accommodating supervisor.
What exactly should be on the title page of the abstract?
Before you write the title page of the abstract correctly, you need to set the margin sizes:
- right - no less 1.5 cm,
- left - 3 cm,
- top and bottom - 2 cm.
It is worth clarifying the size of the fields with the teacher, as he may not adhere to state standards and change the requirements.
The title page must contain:
- the name of the university;
- full name of the department;
- name of the discipline;
- the subject of scientific work;
- student data (full name, course, group number, form of study);
- data of the checking teacher;
- the city where the student is studying;
- year of issue of the document.
Numbering rules and font
Although the numbering starts from the title page, the number "1" is not put down, the same applies to the content page.
In the document, the numbering starts from the introduction page with the number "3".
As a rule, when writing an abstract, it is necessary to adhere to the standard font - Times New Roman and size 14 pt.
Stages of creating a title page
First, conditionally divide the A4 sheet into 4 parts. This is the top, center, right and bottom, and in each of them you must adhere to certain requirements.
By the way! For our readers there is now a 10% discount on
First part
In the first part at the top of the page in capital letters in the center we write: MINISTRY OF EDUCATION AND SCIENCE OF THE RUSSIAN FEDERATION. On the next line, indicate the name of the university and below the name of the department in quotation marks.
Second part
We place the second part in the center: here we write in capital letters the word “SUMMARY”, and after it we indicate the discipline and topic.
The third part
The third block needs to be right-aligned. Here the data of the student and the inspector are written. The position of the teacher is indicated without fail:
Fourth part
And the last, fourth part is drawn up at the very bottom of the page and aligned in the center. Here we indicate the city and year of issue of the abstract.
If the abstract is due at the end of December, then indicate the next year.
It is important to remember that the point is not placed anywhere.
You understand that writing the title page of an abstract correctly is a simple science. However, if you do not want to bother and "rivet the title" yourself, then the student service will do this mechanical work for you. You just have to subscribe to our telegram channel to be aware student life and current news.
Title page, title page - first page academic work, reveals student data and topic. Used for abstract, coursework, thesis, report, . It contains information on:
- Full name of the student
- Speciality
- educational institution
- Work theme
- The type of work
- Year of completion
- Data of the verifier
The design of the title page in accordance with GOST is regulated by the standard 2.105-95. It was adopted in 1995 and to this day is the main standard for how to issue the title page of an abstract and other works (term papers, diplomas, control papers). This GOST is valid in all CIS countries, including:
- Russia
- Belarus
- Ukraine
- Kazakhstan
Download title page samples.
Title page margins:
- left margin: 30 mm;
- right margin: 10 mm;
- top margin: 20 mm;
- bottom margin: 20 mm.
What font should be in the title page.
The guest specifies font size 14 for all fields, except for the table of contents and the title of the work. Usually Times New Roman or another sans-serif font. All data except student information is centered.
Instruction - 6 steps for the correct design of the title page in accordance with GOST.
Depending on whether you are making a title page for a control, term paper, diploma or essay, the completeness of the information will be different. But there are a number of mandatory data that are indicated for each work. The title page header contains the name of the ministry and educational institution.
Step 1. Ministry of Education
Specify the Ministry of Education of your country (14 font, capital letters)
Step 2. Univer.
Next - the full name and form of ownership educational institution(14 font, capital letters)
Step 3. Chair.
After that, we indicate the department (14 font)
Step 4. Type of work.
After that, depending on the type of work, in capital letters (16 font, bold Bold):
- GRADUATE WORK
- COURSE WORK
- TEST
- ESSAY
Step 5. The theme of the work.
Full topic name, classic spelling 16 font, bold, lower case
Step 6. Data of the performer and verifier
The data of the executor and the reviewer for different works are formatted differently, but always have 14 font size and are written in lower case. Here are some examples ○ Diploma Template
○ Template for term paper
○ Test Sample
○ Abstract template
Can they reduce the score for incorrect design of the title
The design of the title page is an important point on any subject and is part of the normative control. If the teacher accepted the work, in which the title page is incorrectly designed, he does not have the right to reduce the score for this, because. in this case, the work was checked and approved by the reviewer.
Which universities are suitable for
These rules are GOST. Therefore, they are universal and suitable for any university in Russia, Ukraine and other CIS countries. If you fundamentally do not want to redo it when the teacher requires it, you can refer to GOST 2.105-95. in which it is clearly spelled out for whom and how it operates.
Is the design different for different items?
The template for the design of the title does not depend on the subject. All its elements can remain the same and only the name of the item can change. The exception is test papers, which in some subjects may need a title page for a notebook. This is the usual A4 sheet format folded in half. We have a separate material where you can download this sample or design it yourself.
Is the design different for specialties?
Specialty doesn't matter at all. All elements remain unchanged, except for the specialty, which needs to be changed for the current one.
